Advanced Materials & Applications
An International peer reviewed journal published by Madras Journal Series Pvt Ltd
ISSN: 2582-5070
Advanced Materials & Applications is an open access journal published monthly online by Madras Journal Series Pvt Ltd. It is an International journal to encourage scientists, academicians, industrialist, research scholars and students to publish their experimental results and potential applications of advanced new materials. It provides an international forum to disseminate their knowledge and publishes 12 issues per year on the following article categories: review articles, original research articles and short communications. The decision of the submitted articles will be intimated to authors within 3 days after the submission and then the articles will be published in the current issue upon acceptance. All the published articles are indexed and are available for download for free.
Aims & Scope:
The Journal is publishing original results in the fields of materials science. This cover, but are not limited to, a variety of materials and their novel applications. Materials include metals, alloys, polymers (conducting and nonconducting polymers), composites (inorganic-organic, inorganic-inorganic and organic-organic), ceramics, glasses, pigments, optical materials, fibers, reinforced materials, semiconductors, micro/nanomaterials, thin/thick films, magnetic materials, silica and carbon, biological and biomedical materials, electrical and electronic materials, amorphous materials, superconductors, nanostructured materials and nanocomposites, resistors, inductors, conductors, capacitors, dielectrics, ferroelectrics, insulators, ionic crystals, etc and their potential applications.
Call for Research Papers-Volume 7 / Issue 2
Submission to first decision: 04 days
Acceptance to publication: 03 days
​
Volume 7 / Issue 1
Original Research Article
1. Synthesis and physical properties of Al3+ doped PVA polymer electrolyte films
Moses. V. G. Isaiah
Citation: Adv. Mater. App. 7 (2023) 1-4
2. Structural and linear optical properties of PbS/PVA/PVP nanocomposite film
R. S. Bhaskar and V. Rekha
Citation: Adv. Mater. App. 7 (2023) 5-8
​
Volume 6 / Issue 2
Original Research Article
1. Investigations on CdS reinforced PMMA Solid films of different molar concentrations for optical applications
S. Padmaja
Citation: Adv. Mater. App. 6 (2021) 6-15
​
2. Synthesis of nanoscale Bi2O3 with rectangular rod-like geometry using Manilkara zapota fruit extract
T. R. Apoorva, S. M. Abhishek, B. S. Santhosh, M. P. Ujwal and N. Kumara Swamy
Citation: Adv. Mater. App. 6 (2021) 16-20
3. Metal ion sequestration and catalytic application of antimony tin tungstate
B. Preetha and K. Anju
Citation: Adv. Mater. App. 6 (2021) 21-27
4. Corrosion behavior of Ti coated poly(o-phenylenediamine) conducting polymer on 316L SS as bipolar plates for fuel cell applications
A. Mugunthan, G. Annamalai and G. Elango
Citation: Adv. Mater. App. 6 (2021) 28-35
Volume 6 / Issue 1
Original Research Article
1. Synthesis and physical properties of lead sulphide-polyvinyl alcohol-polyethylene glycol nanocomposite thick film
Moses. V. G. Isaiah and G. Hamsavalli
Citation: Adv. Mater. App. 6 (2021) 1-5
Volume 5 / Issue 3
Review Article
1. Pure and hybrid Epsomite group crystals-An overview
C. K. Mahadevan
Citation: Adv. Mater. App. 5 (2020) 53-66
Volume 5 / Issue 2
Review Article
1. Mixed crystals of alkali halides-An overview
C. K. Mahadevan
Citation: Adv. Mater. App. 5 (2020) 31-45
​
Original Research Article
2. A study of thermo-mechanical properties of NBR-rice husk ash composites
E. P. Ayswarya and Eby Thomas Thachil
Citation: Adv. Mater. App. 5 (2020) 46-52
​
Volume 5 / Issue 1
1. Comparitive study of inhibition effect of various leaves extracts over mild steel in the aggressive media
A. P. Srikanth and M. J. Judithaa
Citation: Adv. Mater. App. 5 (2020) 1-10
2. Structural and optical properties of Ce doped CdS/PEG nanocomposite films
Moses. V. G. Isaiah
Citation: Adv. Mater. App. 5 (2020) 11-14
3. Influence of titanium oxide nanoparticles on corrosion parameters and properties of tin based solder alloys
Abu Bakr El-Bediwi and Reham Samir
Citation: Adv. Mater. App. 5 (2020) 15-23
4. Synthesis and characterization of binary composite ZrO2/ZnCo2O4 thin films
A. Kharroubi, A. Khiali, H. Benhebal, S. Hamdi and B. Benrabah
Citation: Adv. Mater. App. 5 (2020) 24-30
Volume 4 / Issue 1
​
1. Solvent effect of dioxan, ethanol, chloroform, methanol, acetonitrile on the spectral characteristics of 2-chloro-4-methoxy benzoin
B. Thanuja and Charles C. Kanagam
Citation: Adv. Mater. App. 4 (2019) 1-5
​
Volume 3 / Issue 1
1. Electrophoretic Deposition of Mullite Nano Coating by using Low Voltage DC
Viswanath Bellie, Suresh Joghee and Raghunath Lingaraj
Citation: Adv. Mater. App. 3 (2019) 1-5
2. Novel greener synthesis and characterization of mixed metal oxides using cyathea nilgiriensis holttum plant extract
Joghee Suresh, Lingaraj Ragunath, Bellie Viswanath and Sun Ig Hong
Citation: Adv. Mater. App. 3 (2019) 6-9
​
3. Optical properties of Co doped ZnO thin films by chemical bath deposition technique
J. Yuvaloshini and Ra. Shanmugavadivu
Citation: Adv. Mater. App. 3 (2019) 10-15
​
4. L-Histidine cadmium bromide single crystal for photonic device fabrications
Geetha Palani and V. Chithambaram
Citation: Adv. Mater. App. 3 (2019) 16-21
​
5. Growth and investigations of oxalic acid lithium sulphate single crystal for optical sensors applications
R. Manickam, G. Srinivasan, Geetha Palani, S. Shanmugam and V. Chithambaram
Citation: Adv. Mater. App. 3 (2019) 22-27
​
Volume 2 / Issue 1
​
-
Structural and optical properties of EDTA capped CdS nanostructured thin films synthesized by sol technique L. Arunraja, P. Thirumoorthy, R. Subramanian, L. Dhatchinamurthy and S. Karthikeyan Citation: Adv. Mater. App. 2 (2019) 1-6 Download PDF​
​
2. Preparation and comparative investigation of structural and optical properties of CdS nanoparticles in PVA using
chemical precipitation technique
L. Dhatchinamurthy, P. Thirumoorthy, L. Arunraja and R. Subramanian
Citation: Adv. Mater. App. 2 (2019) 7-15
Download PDF
​
3. An investigation of the inhibitive effects of Aspilia africana leaves extract on the corrosion of aluminium alloy AA8011 in sulphuric acid
E. Oparaku and C. C. Ugwueze
Citation: Adv. Mater. App. 2 (2019) 16-22
Download PDF
​
4. Intermolecular interactions and charge density analysis of thymol-a plant drug molecule via quantum chemical analysis
G. Rajalakshmi and M. Surya
Citation: Adv. Mater. App. 2 (2019) 23-30
Volume 1 / Issue 1
​
-
Effect of Fiber Parameters on Mechanical Behavior of Banana-Palmyra Hybrid Fiber Reinforced Epoxy Composites Vennapusa Vijaya Bhaskar, Kolla Srinivas and Devireddy Siva Bhaskara Rao Citation: Adv. Mater. App. 1 (2018) 1-8 Download PDF
-
Development of Coloured Emulsion Paints with IR Resistant Coatings over Asbestos sheets A. Subasri, AL. Kavitha, E. R. Nagarajan, V. Devadoss Citation: Adv. Mater. App. 1 (2018) 9-12 Download PDF
-
Data-mining study of the electronic charge density of semiconductors A. Sari​ Citation: Adv. Mater. App. 1 (2018) 13-17 Download PDF
-
Adsorption of Chromium (VI) from aqueous solution by using Bioactive Material Macrotyloma uniflorum seed powder N. Gandhi and D. Sirisha Citation: Adv. Mater. App. 1 (2018) 18-29 Download PDF
-
Studying the effects of Polymeric nanomaterial additions in Cement composites Mainak Ghosal and Arun Kumar Chakraborty Citation: Adv. Mater. App. 1 (2018) 30-35 Download PDF